| Pressure Sensitive PVC & OPP Laminates |
|---|
| Pricing and Sizes Available Here - Catalogue Download |
|---|
75μ Matt PVC Laminate |
Clear matt PVC film, coated one side with a highly oxidation, UV
and blanch resistant pressure sensitive acrylic adhesive. The PVC
film produces a ‘dead’ or ‘flat’ finish to reduce glare under
lighting.This adhesive is suitable for indoor and outdoor
applications and is laminated with a 72gsm PE coated siliconised
release liner |
|---|
70μ Satin PVC Laminate |
Clear satin PVC film, coated one side with a highly oxidation,
UV and blanch resistant pressure sensitive acrylic adhesive.
The PVC film produces a ‘satin’ or ‘lustre’ finish to enhance
the contrast of an image, whilst reducing glare. This adhesive
is suitable for indoor and outdoor applications and is
laminated with a 72gsm PE coated siliconised release liner. |
|---|
70μ Gloss PVC Laminate |
Clear Gloss PVC Film, coated one side with a highly oxidation,
UV and blanch resistant pressure sensitive acrylic adhesive.
The PVC film produces a ‘glossy’ finish to enhance the image
when a vibrant look is required. This adhesive is suitable for
indoor and outdoor applications and is laminated with a
72gsm PE coated siliconised release liner. |
|---|
Textured Matt PVC film, coated one one side with a highly oxidation, UV and blanch resistant pressure sensitive acrylic adhesive. The PVC film produces a 'scuff resistant' finish to protect the surface of the image. It is ideal for roller banner stands due to the thickness of the film to fit into the tightest of cassettes. The adhesive is suitable for indoor and outdoor applications and is laminated with a 72gsm PE coated siliconised release liner. |
|---|
125μ Sand Textured Laminate |
Clear sand textured PVC film, coated one side with a highly oxidation, UV and blanch resistant pressure sensitive acrylic adhesive. The PVC film produces a ‘scuff resistant’ finish to protect the surface of an image. It is ideal for pop-up and banner stands and can be used as an anti-slip laminate for floor graphics. The adhesive is suitable for indoor and outdoor applications and is laminated with a 72gsm PE coated siliconised release liner. This laminate has been tested in accordance with the specification BS6677: Part 1: 1986 for the measurement of floor slip resistance, giving extremely low potential for slip when dry and low potential when the sand textured film is wet |
|---|
DigiGuard SR10 250μ Deep Textured PVC |
DigiGuard SR10 deep textured clear 250μ PVC overlaminate for pop-ups. For the protection of pop-up and roll-up display panels. SR10 is rigid and very scratch resistant and when used correctly in combination with our front-print polyesters will produce a durable graphic panel. Download the data sheet here |
|---|
SR10
features one of the thickest and most rigid face films on the market at 250μ and will add the rigidity required to your printed graphic
allowing the panel to hang correctly. Due to the clarity of the film and Adhesive, image dull down is minimised resulting in stunning
looking prints every time. The deep textured emboss is incredibly scratch resistant and will protect the pop-up panel from the
roughest handling. The special adhesive layer, combined with a smooth PE coated release liner, overcomes the edge delamination
issue once and for all. We strongly recommend that the printed and laminated panels are stored flat for a minimum of 30 minutes and
ideally for 24 hours before trimming, as trimming too quickly may lead to edge delamination and ultimately to failure of the finished
graphic. We would recommend using a rotary trimmer to finish the panels. Regardless of the method used to trim the panel it is vitally
important that the cutting blade is sharp. |
50μ Gloss OPP Laminate |
Gloss Clear OPP Film, coated one side with a highly oxidation, UV and blanch resistant pressure sensitive acrylic adhesive. The OPP film produces a ‘glossy’ finish to enhance the image when a vibrant look is required. This adhesive is suitable for indoor and outdoor applications and is laminated with a 72gsm PE coated siliconised release liner. This laminate can also been used for dry wipe or anti graffiti applications. |
|---|
DigiGuard TP5-20 125μ Textured OPP |
DigiGuard TP5-20 125μ textured clear rigid polypropylene overlaminate
for roll-ups. TP5-20 is our clearest and most scratch resistant
overlaminate for roll-ups. This 125μ neutral film and adhesive will minimise any colour shift of your prints. This film is PVC free and
has a water based adhesive making it easier to recycle than a normal PVC overlaminate especially when used in conjunction with our polypropylene printable films. Download the data sheet here |
|---|
DigiGuard TP8-30 200μ Textured OPP |
DigiGuard TP8-30 200μ textured clear rigid PP laminate for pop-ups.
A simple solution for overlaminating pop-ups. TP8-30 is our clearest
and most scratch resistant thick laminate for pop-ups. This 200μ neutral film and adhesive will minimise any colour shift of your
prints. TP8-30 can be used for both flat and curved main panels as well as for small and large radius end panels so one overlaminate will do everything on a pop-up. Download the data sheet here |
|---|
| TP8-30 has excellent rigidity so all the panels will hang beautifully. Some heat can be used in lamination if required but it is designed to work well with no heat. Like our other lamination films for pop-ups we recommend the printed and laminated panels are stored flat for a minimum of 30 minutes and ideally for 24 hours before trimming, as trimming too quickly may lead to edge delamination and ultimately to failure of the finished graphic. We would also recommend using a rotary trimmer to finish the panels. Regardless of the method used to trim the panel it is vitally important that the cutting blade is sharp. This film is PVC free so is easier to recycle than a normal overlaminate |
Store